How To Repair Samsung Galaxy S5 Camera Lens

Introduction

To supervene upon the 16 megapixel rear-camera, follow the steps to remove all previous components required. Take full precaution when operating tools such as heat guns, as they can cause potential health hazards.

Insert your fingernail or plastic opening tool into the divot at the top of the rear-facing camera.

Insert your fingernail or plastic opening tool into the divot at the peak of the rear-facing camera.
Gently pry and twist the flexible rear comprehend off the back of the phone.

Insert a fingernail or plastic opening tool into the recess in the bottom right corner of the battery and lift upward.

Insert a fingernail or plastic opening tool into the recess in the bottom right corner of the battery and lift upward.
Remove the battery abroad from the phone.

Use your fingers to remove the SIM menu

Make certain the battery, the SIM bill of fare, and the MicroSD bill of fare take been removed. If these components are non removed, they may get damaged when the heat is applied.
In this step you'll be using a oestrus gun. The estrus gun operates at loftier temperatures, and information technology may harm you or the device if non used appropriately. Please follow the oestrus gun safety procedures indicated in it's manual to prevent any harm.
Apply a heat gun at an judge distance of 2-3 inches from the phone to apply heat to the phone and loosen upwardly the adhesive in the brandish.

Starting from the upper left corner, insert a guitar option in betwixt the brandish and the phone instance.

Apply the pick to pry the display by sliding the selection in the direction shown.
Make sure you pry the brandish around the edge of the phone. At the bottom of the screen there is a thin metallic strip that connects the brandish to the motherboard, and information technology can exist easily damaged.
If any resistance is encountered, terminate prying and reapply heat to continue prying.

Use the pick to pry the sides and lower part of the display by sliding the selection through the phone.
If whatever resistance is encountered, stop prying and reapply heat to continue prying.

Using the guitar pick, lift the screen slightly.
Yous tin remove the home button if desired.

Slightly lift, but do not remove, the upper end of display assembly.
Do not remove the front panel entirely. It is still attached by a connector.
If you lot are reusing the dwelling button flex cable, be careful not to sever the cable from the habitation button. Adhesive tin crusade the cablevision to rip apart from the home push button. While the home button will however piece of work, the fingerprint scanner will not.

Use the precipitous tip of a guitar pick to lift the front panel associates cable connector direct upward off its socket on the motherboard.
Safely remove the forepart panel associates from phone.